Need any help or advice?+44 (0)1782 450300

CUSTOMER GALLERY

USED IN THIS PROJECT

Want to buy the same materials and equipment used in this tutorial? We've got you!

Please find below a list of all the materials and equipment used in this project, all available to buy right here on the GlassCast website. Shown alongside each product is the approximate quantity used in the tutorial video, to the nearest full pack.

RESIN & PIGMENTS
GlassCast 50 Clear Epoxy Casting Resin - 5kg Thumbnail
EP-G50-5GlassCast 50 Clear Epoxy Casting Resin - 5kg£83.95 /kit

CULR Epoxy Pigment - Super White 200ml Thumbnail
PG-CU-SW-02CULR Epoxy Pigment - Super White 200ml£12.95 /each

Total £0.00

CUSTOMER GALLERY

The Zeta

This incredible piece 'The Zeta' a Credenza and TV Unit was designed and handcrafted by Matthew Nunn Design using a beautiful piece of live-edge walnut and GlassCast 50 Resin pigmented with solid white.

The beautiful design of this piece can be adapted into larger projects up to 4 metres long, which makes a completely unique kitchen in this style possible.

Pieces are fully customisable dependent upon the choice of timber and the colour of the epoxy, to see available variations please follow the link below to the website.

The push release doors accentuate the crisp, clean lines and the additional doors and cupboards can be integrated upon request whilst still keeping the design flow through the piece.

Thank you for sharing your work with us!

ABOUT MATTHEW NUNN DESIGNS

Matthew Nunn Designs

Matthew established Matthew Nunn Design underpinned by the design philosophy - the possibility of design without compromise, without constraint and without limit.

The son of a Yacht and Product Designer, Matthew was immersed in designs and materials from a young age and from here grew his love of elegant design and the use of a variety of materials including carbon fibre.

Designing avant-garde furniture from concept to delivery, Matthew draws inspiration from the world around him and blends his experience and expertise in a wide variety of techniques and materials to deliver bespoke projects.

Matthew's pieces really echo his belief that “To achieve simplicity through complexity is the mark of a good design” and that sentiment is very clear in all of his work which you can see by following the links opposite.


CONTACT INFORMATION

DISCUSSION (0)

Please share any questions or comments you may have about this video tutorial.

LEAVE A COMMENT OR QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

USED IN THIS PROJECT

Want to buy the same materials and equipment used in this tutorial? We've got you!

Please find below a list of all the materials and equipment used in this project, all available to buy right here on the GlassCast website. Shown alongside each product is the approximate quantity used in the tutorial video, to the nearest full pack.

RESIN & PIGMENTS
GlassCast 50 Clear Epoxy Casting Resin - 5kg Thumbnail
EP-G50-5GlassCast 50 Clear Epoxy Casting Resin - 5kg£83.95 /kit

CULR Epoxy Pigment - Super White 200ml Thumbnail
PG-CU-SW-02CULR Epoxy Pigment - Super White 200ml£12.95 /each

Total £0.00

ABOUT MATTHEW NUNN DESIGNS

Matthew Nunn Designs

Matthew established Matthew Nunn Design underpinned by the design philosophy - the possibility of design without compromise, without constraint and without limit.

The son of a Yacht and Product Designer, Matthew was immersed in designs and materials from a young age and from here grew his love of elegant design and the use of a variety of materials including carbon fibre.

Designing avant-garde furniture from concept to delivery, Matthew draws inspiration from the world around him and blends his experience and expertise in a wide variety of techniques and materials to deliver bespoke projects.

Matthew's pieces really echo his belief that “To achieve simplicity through complexity is the mark of a good design” and that sentiment is very clear in all of his work which you can see by following the links opposite.


CONTACT INFORMATION

DISCUSSION (0)

Please share any questions or comments you may have about this video tutorial.

LEAVE A COMMENT OR QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

GlassCast Resin is a trading name of Easy Composites Ltd, registered in England, 7486797. All content copyright (C) Easy Composites Ltd, 2021. All rights reserved.