Need any help or advice?+44 (0)1782 450300

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

GlassCast 3 Epoxy Resin for Decorative Floors - 5kg

GlassCast 3 Floor Resin is a clear, two-part epoxy resin perfect for creating a decorative or artistic floor or a super glossy coating over a decorative floor!

Used by thousands of customers around the world to create a beautifully flat, glossy, and hard-wearing resin floor coating for decorative floors. The recommended pour thickness for GlassCast 3 Floor epoxy is 3mm.

Sold as a kit, including resin and hardener. Available in 500g, 1kg, 5kg, 15kg and 30kg kit sizes.


PRODUCT VERSIONS

Kit Size

AVAILABILITY:4 in stock available for immediate shipping

1500 more can built in 2-3 days


PRICE
£91.75inc. VAT
4 in stock available for immediate shipping
QTY
KITS
KITS
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

  • Self-levelling – No resin cures with a smoother, glossier surface.
  • Self-degassing – Releases trapped air bubbles.
  • UV stable – Minimal yellowing.
  • Solvent free – 100% solids, no VOCs, almost odourless.
  • Hard-wearing – GlassCast is very tough and scratch resistant.
  • Most trusted – GlassCast 3 has been used on thousands of floors, worldwide!

Getting Started

Ambient Temperature, Pot-Life and Pour Depth

The GlassCast range of resins, in common with all epoxies, generate heat as part of the curing process. The amount of time the mixed resin can spend in the pot, as well as the maximum depth it can be poured at, will vary depending on the ambient temperature.

For best results, we recommend working in a consistent room temperature of 18-20°C. GlassCast can be used in temperatures from 15 to 25°C but higher temperatures will reduce the pot-life and the maximum pour-depth of the resin significantly, as shown in the table below.

Ambient Temperature 15°C (minimum) 20°C (minimum) 25°C (minimum)
Maximum Time in Pot (Pot Life) 45 mins 30 mins 22 mins
Maximum Pour Depth 9mm 6mm 3mm
Initial Cure 36 hrs 24 hrs 18 hrs

How much resin do I need?

Working out how much resin you need for a floor is very easy. Start by working out the area of your floor in square metres; this is just the length in metres, multiplied by the width.

For example, a 3m x 2m room = 6 square metres.The floor needs to be completely level, then a 2-3mm depth layer of resin can be applied.

What else do I need?

Very little! – Pouring a GlassCast 3 solid colour floor is straight-forward and requires no special tools or equipment. You’ll just need some nitrile gloves, 2 large mixing buckets, a mixing stick and a spreader.

If you would like to pour a clear coating over something like pennies or vinyl records, see our Penny Floor Tutorial.

Alternatively, if you wish to create an artistic resin floor, to look like marble, we would recommend making a small scale piece before scaling up and to watch our resin countertop tutorial here to see how the effects are achieved.

Full instructions and support

Although easy-to-use, GlassCast 3 is still a chemical product. To make sure you work safely and get great results, you must download and read the technical and safety datasheets from this page before you begin.

GlassCast 3 is also the ideal product for applying glossy finish surfaces to bar tops and table tops in addition to decorative floors and penny floors.

PRODUCT VIDEOS(1)
  • Self-levelling – No resin cures with a smoother, glossier surface.
  • Self-degassing – Releases trapped air bubbles.
  • UV stable – Minimal yellowing.
  • Solvent free – 100% solids, no VOCs, almost odourless.
  • Hard-wearing – GlassCast is very tough and scratch resistant.
  • Most trusted – GlassCast 3 has been used on thousands of floors, worldwide!

Getting Started

Ambient Temperature, Pot-Life and Pour Depth

The GlassCast range of resins, in common with all epoxies, generate heat as part of the curing process. The amount of time the mixed resin can spend in the pot, as well as the maximum depth it can be poured at, will vary depending on the ambient temperature.

For best results, we recommend working in a consistent room temperature of 18-20°C. GlassCast can be used in temperatures from 15 to 25°C but higher temperatures will reduce the pot-life and the maximum pour-depth of the resin significantly, as shown in the table below.

Ambient Temperature 15°C (minimum) 20°C (minimum) 25°C (minimum)
Maximum Time in Pot (Pot Life) 45 mins 30 mins 22 mins
Maximum Pour Depth 9mm 6mm 3mm
Initial Cure 36 hrs 24 hrs 18 hrs

How much resin do I need?

Working out how much resin you need for a floor is very easy. Start by working out the area of your floor in square metres; this is just the length in metres, multiplied by the width.

For example, a 3m x 2m room = 6 square metres.The floor needs to be completely level, then a 2-3mm depth layer of resin can be applied.

What else do I need?

Very little! – Pouring a GlassCast 3 solid colour floor is straight-forward and requires no special tools or equipment. You’ll just need some nitrile gloves, 2 large mixing buckets, a mixing stick and a spreader.

If you would like to pour a clear coating over something like pennies or vinyl records, see our Penny Floor Tutorial.

Alternatively, if you wish to create an artistic resin floor, to look like marble, we would recommend making a small scale piece before scaling up and to watch our resin countertop tutorial here to see how the effects are achieved.

Full instructions and support

Although easy-to-use, GlassCast 3 is still a chemical product. To make sure you work safely and get great results, you must download and read the technical and safety datasheets from this page before you begin.

GlassCast 3 is also the ideal product for applying glossy finish surfaces to bar tops and table tops in addition to decorative floors and penny floors.

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for Epoxy Resin for Floors

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer

GlassCast Resin is a trading name of Easy Composites Ltd, registered in England, 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.