Need any help or advice?+44 (0)1782 450300
Safety Datasheet (SDS) |
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
These day-glo neon pigments can be used to add a bright, see-through fluorescent colour to resin castings and coatings. Set of 6 of attention-grabbing colours!
AVAILABILITY:More than 20 availablefor immediate shipping
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
These neon tinting pigments are 100% compatible with the GlassCast Resin range and can be used to tint the resin anywhere from a very subtle shade through to quite intense levels of colour, such as the neon yellow used in our resin plank table project.
The tints are designed to colour the resin without stopping light from passing through it meaning that tinted resin still maintains a good degree of transparency and depth. Light passing through the coloured resin seems to make it glow!
Advantages
Set of 6 Neon Colours
Neon Red, Neon Orange, Neon Yellow, Neon Pink, Neon Blue, Neon Green
How to Use
Using these GlassCast Resin Tinting Pigments couldn't be easier. Just mix your GlassCast resin and hardener together and then add drips of tinting pigment until you achieve the designed level of tint. To maintain a consistent colour across the whole project, tint all your resin first before adding any hardener and then just mix up batches as you need them.
Where are the Other Tinting Pigment Sets?
If you're looking for our other sets of tinting pigments, the sets of 6 Primary Colours and 10 Assorted Colours, these sets have now been replaced by our new CULR Universal Epoxy Colour Pigments.
The amazing new CULR pigments can be used to tint resin or to give it a solid colour; in fact, they're even better at tinting resin that our original tinting pigments because they mix into the resin quicker and are so concentrated that just a single 20ml bottle can be used to tint more than 50kg of resin! What's more, they're available in single colours as well as assorted sets so you only need to buy the colour or colours you want.
So, for standard (non-neon) colours, including all the classic colours for tinting resin river tables and similar projects, check out our new range of CURL Universal Pigments.
These neon tinting pigments are 100% compatible with the GlassCast Resin range and can be used to tint the resin anywhere from a very subtle shade through to quite intense levels of colour, such as the neon yellow used in our resin plank table project.
The tints are designed to colour the resin without stopping light from passing through it meaning that tinted resin still maintains a good degree of transparency and depth. Light passing through the coloured resin seems to make it glow!
Advantages
Set of 6 Neon Colours
Neon Red, Neon Orange, Neon Yellow, Neon Pink, Neon Blue, Neon Green
How to Use
Using these GlassCast Resin Tinting Pigments couldn't be easier. Just mix your GlassCast resin and hardener together and then add drips of tinting pigment until you achieve the designed level of tint. To maintain a consistent colour across the whole project, tint all your resin first before adding any hardener and then just mix up batches as you need them.
Where are the Other Tinting Pigment Sets?
If you're looking for our other sets of tinting pigments, the sets of 6 Primary Colours and 10 Assorted Colours, these sets have now been replaced by our new CULR Universal Epoxy Colour Pigments.
The amazing new CULR pigments can be used to tint resin or to give it a solid colour; in fact, they're even better at tinting resin that our original tinting pigments because they mix into the resin quicker and are so concentrated that just a single 20ml bottle can be used to tint more than 50kg of resin! What's more, they're available in single colours as well as assorted sets so you only need to buy the colour or colours you want.
So, for standard (non-neon) colours, including all the classic colours for tinting resin river tables and similar projects, check out our new range of CURL Universal Pigments.
Safety Datasheet (SDS) |
Yes, absolutely. These translucent tinting pigments are ideal for use with the GlassCast range of clear casting epoxies. The pigments are very much designed to be translucent and thus you would see any objects embedded within the resin however, the more pigment you add, the deeper the tint and eventually with enough pigment you could make the resin opaque.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
GlassCast Resin is a trading name of Easy Composites Ltd, registered in England, 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.