Downloads (2)

Dutch Safety DataSheet441 KB
Safety Datasheet (SDS)397 KB

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

Jet Black CULR Epoxy Pigment

Super-concentrated 'Jet Black' liquid resin pigment. Add a single drop or two to clear epoxy resin to create a translucent, see-through tint or add a few drops more to achieve a solid, opaque colour. Ideal for use in resin art, decorative flooring, countertops and bars, jewellery, wood-turning and much more.

Our Jet Black epoxy pigment is available in 20ml (up to 5kg of resin) or 200ml (up to 50kgs of resin!) bottle sizes.


PRODUCT VERSIONS

Pack Size

AVAILABILITY:More than 50 availablefor immediate shipping


PRICE
£2.94inc. VAT
More than 50 availablefor immediate shipping
QTY
EACH
EACH
We won’t be beaten on price!

If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.

Universal Pigment for Translucent Tint and Solid Opaque Colour

CULR™ pigments can be used both to create subtle, see-through, translucent colour tints and also for strong, vibrant, solid colours, simply by varying the amount of pigment added to your resin

These universal epoxy pigments can be used to tint resin river tables and clear castings or add strong, vibrant, opaque colour to resin for projects including resin flow art, counter-tops, decorative flooring, wood inlays, castings and more.

A translucent colour tint can be achieved by adding just a drop or two into your resin mix. For solid colours, simply add more pigment until the desired opacity is achieved. See the table below for a guide to pigment levels for different colours.

Super Concentrated

CULR pigments are one of the most concentrated resin pigments you can buy and the advanced liquid formula ensures that these intense pigments disperse in seconds.

For solid colours, up to 5kg (5 litres) of epoxy resin can be coloured using a single 20ml bottle of CULR pigment.

For a translucent colour tint, much less pigment is required. A single 20ml bottle is enough to produce a see-through colour tint in more than 50kgs of resin!

The exact amount of pigment needed varies from colour to colour and intensity required. This Jet Black pigment but will typically use between 0.1% (for a translucent appearance) and 1% (for a solid, opaque colour).

Pigmenting for Primer Coats

When using CULR pigments to create a highly opaque ‘primer coat’ in projects such as resin countertops, a very high pigment ratio of 10% should be used. Such a high ratio will ensure the very strong, opaque colour necessary to block-out existing countertops or textures of wood substrates below.

The ratio of 10% pigment to resin is especially important if using light colours like Super White or metallic CULR pigments.

Blend to Create any Colour

CULR pigments are designed to be blended with each other to create almost infinite colour and shade possibilities.

For resin artists creating flow art -type pieces or makers wishing to create realistic multi-tone marble / stone coat effects, CULR pigments have been developed to work together as a complete colour system, allowing almost any colour to be created simply by blending any of the colours whilst adding drops of white or black can adjust the saturation and brightness to create infinite possibilities.

Blending Jet Black pigment with varying amounts of Super White pigment can create precise shades of grey from off-white - to light grey - to solid black, as shown in the Jet Black Tone Chart image on this listing.

We have not tested blending the CULR pigments with other pigment brands and types and although in many cases it may work, we would recommend testing specifically to ensure there is not a compatibility issue with another brand of pigment.

How to Use

CULR™ pigments are super-easy to use; just drip the desired amount of any colour into either mixed resin and hardener or into just the resin side only (if you want to pigment the resin in advance of using it).

Depending on the strength of the colour required you'll typically need between 0.1% and 1% of pigment. The tables below provide an easy reference as to how much pigment to add or simply keep adding drops until you get the desired colour strength. Remember that CULR pigments are super-concentrated and so you only need a tiny amount to achieve stunning, vivid colours.

Jet Black Pigment Ratio Guide

Amount of resin 50g 100g 1kg 5kg 30kg
Translucent tint < 1 drop 1 drop 6 drops 30 drops 10g
Solid opaque colour 17 drops 34 drops 10g 50g 300g

Compatibility

CULR pigments are designed specifically for use with clear epoxy resins. They have been thoroughly tested with the GlassCast range of casting and coating resins but should also work with most other clear epoxy systems, although we always recommend conducting a test first.

CULR pigments are not suitable for use with alternative resin types such as polyurethane.

Universal Pigment for Translucent Tint and Solid Opaque Colour

CULR™ pigments can be used both to create subtle, see-through, translucent colour tints and also for strong, vibrant, solid colours, simply by varying the amount of pigment added to your resin

These universal epoxy pigments can be used to tint resin river tables and clear castings or add strong, vibrant, opaque colour to resin for projects including resin flow art, counter-tops, decorative flooring, wood inlays, castings and more.

A translucent colour tint can be achieved by adding just a drop or two into your resin mix. For solid colours, simply add more pigment until the desired opacity is achieved. See the table below for a guide to pigment levels for different colours.

Super Concentrated

CULR pigments are one of the most concentrated resin pigments you can buy and the advanced liquid formula ensures that these intense pigments disperse in seconds.

For solid colours, up to 5kg (5 litres) of epoxy resin can be coloured using a single 20ml bottle of CULR pigment.

For a translucent colour tint, much less pigment is required. A single 20ml bottle is enough to produce a see-through colour tint in more than 50kgs of resin!

The exact amount of pigment needed varies from colour to colour and intensity required. This Jet Black pigment but will typically use between 0.1% (for a translucent appearance) and 1% (for a solid, opaque colour).

Pigmenting for Primer Coats

When using CULR pigments to create a highly opaque ‘primer coat’ in projects such as resin countertops, a very high pigment ratio of 10% should be used. Such a high ratio will ensure the very strong, opaque colour necessary to block-out existing countertops or textures of wood substrates below.

The ratio of 10% pigment to resin is especially important if using light colours like Super White or metallic CULR pigments.

Blend to Create any Colour

CULR pigments are designed to be blended with each other to create almost infinite colour and shade possibilities.

For resin artists creating flow art -type pieces or makers wishing to create realistic multi-tone marble / stone coat effects, CULR pigments have been developed to work together as a complete colour system, allowing almost any colour to be created simply by blending any of the colours whilst adding drops of white or black can adjust the saturation and brightness to create infinite possibilities.

Blending Jet Black pigment with varying amounts of Super White pigment can create precise shades of grey from off-white - to light grey - to solid black, as shown in the Jet Black Tone Chart image on this listing.

We have not tested blending the CULR pigments with other pigment brands and types and although in many cases it may work, we would recommend testing specifically to ensure there is not a compatibility issue with another brand of pigment.

How to Use

CULR™ pigments are super-easy to use; just drip the desired amount of any colour into either mixed resin and hardener or into just the resin side only (if you want to pigment the resin in advance of using it).

Depending on the strength of the colour required you'll typically need between 0.1% and 1% of pigment. The tables below provide an easy reference as to how much pigment to add or simply keep adding drops until you get the desired colour strength. Remember that CULR pigments are super-concentrated and so you only need a tiny amount to achieve stunning, vivid colours.

Jet Black Pigment Ratio Guide

Amount of resin 50g 100g 1kg 5kg 30kg
Translucent tint < 1 drop 1 drop 6 drops 30 drops 10g
Solid opaque colour 17 drops 34 drops 10g 50g 300g

Compatibility

CULR pigments are designed specifically for use with clear epoxy resins. They have been thoroughly tested with the GlassCast range of casting and coating resins but should also work with most other clear epoxy systems, although we always recommend conducting a test first.

CULR pigments are not suitable for use with alternative resin types such as polyurethane.

Downloads (2)

Dutch Safety DataSheet441 KB
Safety Datasheet (SDS)397 KB
Can’t find the answer you’re looking for?Ask our technical team a question.

Hi Toby, yes, in fact it's really effective at created a 'smoked' or 'tinted' black effect, like you'd get in tinted windows, right through to a barely translucent black like an obsidian gem stone. Start with just a single drop, or even less (depending on the quantity of resin).

ASK YOUR OWN QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

Customer Product Reviews for Jet Black CULR Epoxy Pigment

No reviews

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

SUBMIT YOUR OWN PRODUCT REVIEW

We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.

Shipping Information

Restrictions

This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.

Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.

Package Size

There are no package size restrictions or surcharges for this product.

Delivery Cost

To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.

100% SECURE

    Secured by Digicert Payments by Adyen

PAYMENT METHODS

    Mastercard logo Visa logo Maestro logo PayPal logo Bank Transfer

GlassCast Resin is a trading name of Easy Composites Ltd, registered in England, 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.