Need any help or advice?+44 (0)1782 450300

VIDEO TUTORIAL

USED IN THIS PROJECT

Want to buy the same materials and equipment used in this tutorial? We've got you!

Please find below a list of all the materials and equipment used in this project, all available to buy right here on the GlassCast website. Shown alongside each product is the approximate quantity used in the tutorial video, to the nearest full pack.

MATERIALS & CONSUMABLES
GlassCast 3 Clear Epoxy Coating Resin - 37.5kg Thumbnail
EP-GC-37GlassCast 3 Clear Epoxy Coating Resin - 37.5kg£529.96 /kit

Nitrile Gloves - Box of 10 Large Thumbnail
NG-100-LNitrile Gloves - Box of 10 Large£6.60 /pack

CULR Epoxy Pigment - Jet Black 200ml Thumbnail
PG-CU-JB-02CULR Epoxy Pigment - Jet Black 200ml£12.95 /each

CULR Epoxy Pigment - Super White 200ml Thumbnail
PG-CU-SW-02CULR Epoxy Pigment - Super White 200ml£12.95 /each

Total £0.00

VIDEO TUTORIAL

How to Lay a Glossy Resin Floor Using Epoxy Resin

In this video tutorial we cover the complete step-by-step process required in order to lay an ultra high gloss epoxy resin floor that you might see in showrooms, exclusive garages and designer living spaces. What's even more amazing than the pristine high gloss finish is the fact that a GlassCast 3 resin floor can be installed in just a few hours using only basic tools and equipment.


What is covered in the tutorial?

This detailed, hands-on video tutorial will take you step-by-step through the whole process, including:

  • How to prepare the floor and ensure suitable conditions
  • How to calculate how much resin you will need for your floor area
  • How to calculate how much pigment you will need
  • How to measure and mix the resin, in batches, to ensure proper mixing
  • How to pour and spread the resin
  • How to get rid of any air bubbles
  • How long to allow the epoxy resin floor to cure

What about for decorative, blended colour or metallic floors?

Although this video focuses on the installation of a single colour high gloss resin floor, most of the information and techniques would be exactly the same if you were installing a blended colour floor - often combining metallic effects with one or more colours to achieve a unique appearance.

If you are installing such a floor we recommend watching this video to learn the basics of gloss epoxy floor installation using GlassCast 3 including environment conditions, floor prep, batch mixing, pouring and spreading.

For specific advice on blending different colours and effects, please message our sales team or call 01782 450300.


DISCUSSION (0)

Please share any questions or comments you may have about this video tutorial.

LEAVE A COMMENT OR QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

USED IN THIS PROJECT

Want to buy the same materials and equipment used in this tutorial? We've got you!

Please find below a list of all the materials and equipment used in this project, all available to buy right here on the GlassCast website. Shown alongside each product is the approximate quantity used in the tutorial video, to the nearest full pack.

MATERIALS & CONSUMABLES
GlassCast 3 Clear Epoxy Coating Resin - 37.5kg Thumbnail
EP-GC-37GlassCast 3 Clear Epoxy Coating Resin - 37.5kg£529.96 /kit

Nitrile Gloves - Box of 10 Large Thumbnail
NG-100-LNitrile Gloves - Box of 10 Large£6.60 /pack

CULR Epoxy Pigment - Jet Black 200ml Thumbnail
PG-CU-JB-02CULR Epoxy Pigment - Jet Black 200ml£12.95 /each

CULR Epoxy Pigment - Super White 200ml Thumbnail
PG-CU-SW-02CULR Epoxy Pigment - Super White 200ml£12.95 /each

Total £0.00

DISCUSSION (0)

Please share any questions or comments you may have about this video tutorial.

LEAVE A COMMENT OR QUESTION

Note: Your name will be abbreviated and your email address will only be used to email you the answer directly

100% SECURE

    Sectigo Secure logo

PAYMENT METHODS

    WorldPay logo Mastercard logo Visa logo PayPal logo

All content copyright (C) Easy Composites Ltd, 2020. All rights reserved.