Need any help or advice?+44 (0)1782 450300
This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Smaller sized plastic demoulding wedges are used for the releasing/demoulding of smaller parts or resin castings. Compared with the chunky demoulding wedges these small, thin edged wedges are much more suitable for the careful releasing of thinner and smaller castings and can be used severally around the edge of a mould to facilitate release.
Available in small and medium size, sold individually.
AVAILABILITY:More than 50 availablefor immediate shipping
Volume discounts
0-4 | 5-19 | 20+ |
---|---|---|
£1.80 | £1.56 | £1.32 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Available sizes are Small or Medium, please choose the size required from the drop down above.
These demoulding wedges feature a very sharp leading edge allowing them to easily pry under any moulding and the low friction polymer provides an easy drive-in whilst minimising the risk of damage to your moulds or casts. It is common practice to use multiple wedges around the perimeter of a particularly stubborn moulding as it will provide an even pressure and require less force than a single lever.
Further Information
Dimensions of the Wedges
Size | Length (mm) | >Width (mm) | >Height (mm) |
---|---|---|---|
Small | 60 | 31 | 7 |
Medium | 80 | 41 | 11 |
These wedges are manufactured in Germany by Dargewitz Composites who specialise in high quality injection moulded components especially for the composites industry.
Volume discounts
0-4 | 5-19 | 20+ |
---|---|---|
£1.80 | £1.56 | £1.32 |
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Available sizes are Small or Medium, please choose the size required from the drop down above.
These demoulding wedges feature a very sharp leading edge allowing them to easily pry under any moulding and the low friction polymer provides an easy drive-in whilst minimising the risk of damage to your moulds or casts. It is common practice to use multiple wedges around the perimeter of a particularly stubborn moulding as it will provide an even pressure and require less force than a single lever.
Further Information
Dimensions of the Wedges
Size | Length (mm) | >Width (mm) | >Height (mm) |
---|---|---|---|
Small | 60 | 31 | 7 |
Medium | 80 | 41 | 11 |
These wedges are manufactured in Germany by Dargewitz Composites who specialise in high quality injection moulded components especially for the composites industry.
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.This product is not classed as dangerous goods for transport and can be shipped to all destinations without restriction.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
There are no package size restrictions or surcharges for this product.
To find the delivery cost of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
GlassCast Resin is a trading name of Easy Composites Ltd, registered in England, 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.