Need any help or advice?+44 (0)1782 450300
This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.
GlassCast 10 Safety DataSheet (SDS) | 1 MB | |
GlassCast 10 Technical DataSheet (TDS) | 839 KB |
In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
If you're looking for the perfect epoxy resin for resin jewellery, keyrings, pendants, memorial castings and more, look no further! The recommended pour thickness for GlassCast 10 is 10mm, which can be layered to achieve a greater depth.
GlassCast 10 is a professional quality, two-part water-clear epoxy casting resin developed specifically with jewellery-making and resin craft in mind. Professional and serious amateur jewellery makers appreciate GlassCast 10 for its bubble-free castings, ultra-bright clarity, assured long-term UV stability and ideal working and cure time for jewellery sized pieces.
Sold as a kit, including resin and hardener. Available in 500g, 1kg and 5kg kit sizes.
AVAILABILITY:20 in stock available for immediate shipping
8000 more can built in 2-3 days
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
The perfect epoxy resin for resin jewellery, keyrings, pendants, and more
GlassCast 10 is a professional quality, water-clear epoxy casting resin developed specifically with jewellery-making and resin craft in mind. It is one of the clearest, brightest, and most UV stable epoxy resins that money can buy, ensuring your jewellery pieces outshine the rest from the moment they’re made, and for years to come.
GlassCast 10 is suitable for resin castings up to 10mm in depth and can be layers to achieve greater depth or to encapsulate items like flowers and precious materials. Once poured, GlassCast 10 will be cured and ready to demould and finish in less than 24hrs.
Newly created pieces will be clean and shiny with no residue and no odour. Cured GlassCast is totally inert and skin safe.
Why Choose GlassCast 10 for Jewellery Making?
Endless Possibilities
What to Make
GlassCast 10 is used by thousands of jewellery makers and resin crafters to create an almost limitless range of jewellery and craft pieces such as pendants, rings, cufflinks, earrings, keyrings, fridge magnets, memorials and much more.
What to Add - Pigments, Dyes and Inclusions
Choosing how to colour, tint and embellish your GlassCast 10 jewellery pieces is where you can really express your creativity.
Included in the GlassCast range are CULR pigments, SHIMR powders and alcohol inks; all of which can be used to add vibrant colour, subtle tints, or glittering metallic effects to your pieces.
Beyond resins and pigments, the clarity and stable epoxy chemistry of GlassCast make it ideal for adding petals, keep-sakes, precious metals, stones, shells, gems and more. The possibilities really are endless.
What to Cast Into
There are so many ways you can use GlassCast 10 to create resin jewellery, here are some of the most popular:
* Silicone and polypropylene plastic moulds should be fine but for other materials, test compatibility first to ensure the resin won’t stick.
Get Started!
Take a look in the GlassCast customer gallery to see hundreds of beautiful, original pieces created by other talented customers, all using GlassCast clear epoxy resins.
If you have any questions at all, please get in touch through our contact page, social media, Livechat or over the phone. Our friendly team are happy to help.
Ambient Temperature, Pot-Life and Pour Depth
The GlassCast range of resins, in common with all epoxies, generate heat as part of the curing process. The amount of time the mixed resin can spend in the pot, as well as the maximum depth it can be poured at, will vary depending on the ambient temperature.
For best results, we recommend working in a consistent room temperature of 18-20°C. GlassCast can be used in temperatures from 15 to 25°C but higher temperatures will reduce the pot-life and the maximum pour-depth of the resin significantly, as shown in the table below.
Ambient Temperature | 15°C (minimum) | 20°C (minimum) | 25°C (minimum) |
---|---|---|---|
Maximum Time in Pot (Pot Life) | 60 mins | 45 mins | 30 mins |
Maximum Pour Depth | 10mm | 10mm | 6mm |
Initial Cure | 48 hrs | 36 hrs | 24 hrs |
The perfect epoxy resin for resin jewellery, keyrings, pendants, and more
GlassCast 10 is a professional quality, water-clear epoxy casting resin developed specifically with jewellery-making and resin craft in mind. It is one of the clearest, brightest, and most UV stable epoxy resins that money can buy, ensuring your jewellery pieces outshine the rest from the moment they’re made, and for years to come.
GlassCast 10 is suitable for resin castings up to 10mm in depth and can be layers to achieve greater depth or to encapsulate items like flowers and precious materials. Once poured, GlassCast 10 will be cured and ready to demould and finish in less than 24hrs.
Newly created pieces will be clean and shiny with no residue and no odour. Cured GlassCast is totally inert and skin safe.
Why Choose GlassCast 10 for Jewellery Making?
Endless Possibilities
What to Make
GlassCast 10 is used by thousands of jewellery makers and resin crafters to create an almost limitless range of jewellery and craft pieces such as pendants, rings, cufflinks, earrings, keyrings, fridge magnets, memorials and much more.
What to Add - Pigments, Dyes and Inclusions
Choosing how to colour, tint and embellish your GlassCast 10 jewellery pieces is where you can really express your creativity.
Included in the GlassCast range are CULR pigments, SHIMR powders and alcohol inks; all of which can be used to add vibrant colour, subtle tints, or glittering metallic effects to your pieces.
Beyond resins and pigments, the clarity and stable epoxy chemistry of GlassCast make it ideal for adding petals, keep-sakes, precious metals, stones, shells, gems and more. The possibilities really are endless.
What to Cast Into
There are so many ways you can use GlassCast 10 to create resin jewellery, here are some of the most popular:
* Silicone and polypropylene plastic moulds should be fine but for other materials, test compatibility first to ensure the resin won’t stick.
Get Started!
Take a look in the GlassCast customer gallery to see hundreds of beautiful, original pieces created by other talented customers, all using GlassCast clear epoxy resins.
If you have any questions at all, please get in touch through our contact page, social media, Livechat or over the phone. Our friendly team are happy to help.
Ambient Temperature, Pot-Life and Pour Depth
The GlassCast range of resins, in common with all epoxies, generate heat as part of the curing process. The amount of time the mixed resin can spend in the pot, as well as the maximum depth it can be poured at, will vary depending on the ambient temperature.
For best results, we recommend working in a consistent room temperature of 18-20°C. GlassCast can be used in temperatures from 15 to 25°C but higher temperatures will reduce the pot-life and the maximum pour-depth of the resin significantly, as shown in the table below.
Ambient Temperature | 15°C (minimum) | 20°C (minimum) | 25°C (minimum) |
---|---|---|---|
Maximum Time in Pot (Pot Life) | 60 mins | 45 mins | 30 mins |
Maximum Pour Depth | 10mm | 10mm | 6mm |
Initial Cure | 48 hrs | 36 hrs | 24 hrs |
Yes the cured GlassCast 10 can be turned in a wood lathe and machined with woodworking tools in general. Allow a minimum of 48 hours to fully harden before machining begins.
Ideally you want to pour each layer when the previous is cured to the B stage - this means firm but tacky. The time it takes to get there depends on temperature and depth of cast but you are roughly looking around 6 hours.
Perfectly clear, bubble-free resin that produces consistent results. As a premium product, it does suffer with crystallisation, but always returns to water clear after sitting in 60+ degree water for a while. Minimal shrinkage is also a big plus point.
Fantastic product, great at degassing for bubble free castings, good machinability when cutting, turning or shaping/carving.
Great. Super happy. Fast delivery (came next day) and thanks to Charlotte in the office who helped me to find the delivery (at my own house!!
I've been using glass cast 50 since the beginning and have now produced nearly 20 river tables and similar projects. I tested a few other resins in the beginning and settled on glass cast 50 because of the cure speed and bubble free finish. Other resins I tested for river tables were much too slow to cure. One took a week to cure and still felt too soft to machine properly. Great product.
TOP PRODUCT!! have used Glasscast 50 for 3 river tables now, they have all worked perfectly and great technical support from Warren who helped me figure out a problem I was having with tiny air bubbles (was caused by jiffy mixer - dont use one!). Great product, great service.
brilliant product, really happy with the end result, did exactly what it said on the tin. only reason I didn't give 5 stars is because it would have been better if I could buy a 2.5kg kit, the 5 was too big and the 1kg is too small.
No comparisson! Glasscast 50 is the only epoxy resin i will use for my river tables. quality of the product is spot on - bubble free, cures hard, machines great, polishes great. What more can I say? 5 star product.
I have been working with resin for quite a while now, using various resin products, with varied results. After trying GlassCast, I have found a product I'm sticking with. Easy to work with, easy to finish. Night and day from others I have used. Highly recommended.
Highly recommend! Great products supplied via great service. Top quality all round. Will be staying with GlassCast and not even tempted to look elsewhere!
I really like this product and would definitly recommend it to anyone. This was my first go at making resin jewelry and I'm really pleased with the results. I will be making lots of Christmas presents myself this year which is much nicer than just buying things. The only reason I didn't give 5 stars is because I think the delivery cost is to high and should be free. Especially when you are just starting out £6 is a lot of money.
I use Glasscast 10 and Glasscast 3 for my jewellery pieces. I'm starting my own Youtube channel and will be showing other beginners how to make their own resin jewellery and I will always be using this resin. I like to include things like petals, seeds and other keepsakes in my resin castings and so the fact that this resin is really clear and bubble free is very important. Always fast delivery and help from the friendly staff at Glasscast when I need it! FAB : )
Great resin, works brilliantly with alcohol inks to create beautiful translucent peices like my gummy bear fridge magnets. I also use lots of other types of pigments and they've all worked great with no colour change or funny reactions. Definitely recommended for anyone wanting to start making they're own jewellery.
I use GlassCast 10 with alcohol inks to make keyrings and pendants. I love this resin because of how clear it is and how there are no trapped air bubbles. It also has no smell which is really important to me because I do my resin work in my spare room and don't want to smell the house out!
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
There are no package size restrictions or surcharges for this product.
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
GlassCast Resin is a trading name of Easy Composites Ltd, registered in England, 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.