Need any help or advice?
+44 (0)1782 450300
Downloads (2)
This is a chemical product. Before storage or use you must download and read the accompanying safety and technical datasheets.
 | Safety DataSheet (SDS) |  695 KB |
| Dutch Safety DataSheet (SDS) | 745 KB |
Shipping Information
Restrictions
In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
RW4 Spray Wax
- Xencast
- No reviews
Xencast® RW4 is a very reliable high-build release wax spray suitable for a wide range of mould-release and barrier applications. Its convenient aerosol format makes the wax very easy to apply over complex mould surfaces.
Sold in a 400ml can.
AVAILABILITY:More than 20 availablefor immediate shipping
Volume discounts
| 0-5 | 6+ |
|---|---|
| £15.78 | £14.40 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Xencast® RW4 is a very reliable high-build release wax spray suitable for a wide range of mould-release and barrier applications.
RW4 is compatible with all thermoset resin systems including epoxy, polyester, vinylester and polyurethane and is suitable for use on most substrates including rigid metals, plastics and laminates, as well as flexible polyurethane and silicone moulds.
The aerosol (spray) format makes the wax easier to apply over complex or intricate mould surfaces than conventional hard wax and has the distinct advantage over PVA release agent in that it won’t fish-eye away from repellent substrates or previous release agents.
RW4 contains no silicone and is suitable for use up to 100°C.
How to Use
New patterns, moulds or surfaces will typically require 2-3 coats of RW4. When re-using existing moulds, a single application between releases is often sufficient. When applying to new porous or semi-porous surfaces such as wood, MDF or plaster, 4 or 5 coats may be required. Multiple thin applications are preferable to fewer, thick applications.
Hold the can approximately 300mm from the mould surface and spray evenly, keeping the can moving. Ensure complete coverage. Allow each coat to dry for 10 minutes between applications. Once dry, RW4 can be buffed to a high-gloss, or can be left with a light texture.
Always ensure the wax has fully dried (at least 10 minutes after the last application) before casting.
Volume discounts
| 0-5 | 6+ |
|---|---|
| £15.78 | £14.40 |
We won’t be beaten on price!
If you believe you’re buying an equivalent product cheaper elsewhere, contact us to discuss your requirements.
Xencast® RW4 is a very reliable high-build release wax spray suitable for a wide range of mould-release and barrier applications.
RW4 is compatible with all thermoset resin systems including epoxy, polyester, vinylester and polyurethane and is suitable for use on most substrates including rigid metals, plastics and laminates, as well as flexible polyurethane and silicone moulds.
The aerosol (spray) format makes the wax easier to apply over complex or intricate mould surfaces than conventional hard wax and has the distinct advantage over PVA release agent in that it won’t fish-eye away from repellent substrates or previous release agents.
RW4 contains no silicone and is suitable for use up to 100°C.
How to Use
New patterns, moulds or surfaces will typically require 2-3 coats of RW4. When re-using existing moulds, a single application between releases is often sufficient. When applying to new porous or semi-porous surfaces such as wood, MDF or plaster, 4 or 5 coats may be required. Multiple thin applications are preferable to fewer, thick applications.
Hold the can approximately 300mm from the mould surface and spray evenly, keeping the can moving. Ensure complete coverage. Allow each coat to dry for 10 minutes between applications. Once dry, RW4 can be buffed to a high-gloss, or can be left with a light texture.
Always ensure the wax has fully dried (at least 10 minutes after the last application) before casting.
ASK YOUR OWN QUESTION
Customer Product Reviews for RW4 Spray Wax
SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.SUBMIT YOUR OWN PRODUCT REVIEW
We publish all reviews for verified purchases. Submit your own review and help other customers with their choices.Shipping Information
Restrictions
In the currently selected pack size, this product is classed as dangerous goods in limited quantity for the purposes of transport.
Shipping is possible to all UK addresses, including the Channel Islands, without restriction. However, due to being classed as 'dangerous goods', delivery times are not guaranteed on any delivery service.
Shipping to EU countries is now done through our European subsidiary based in the Netherlands. All EU customers should use www.easycomposites.eu.
To check availability of shipping to any other country, add the item to your basket and use the shipping calculator on the basket page.
For a full information regarding the shipment of dangerous goods to all destinations, see our delivery information page.
Package Size
There are no package size restrictions or surcharges for this product.
Delivery Cost
To find the availability and cost for delivery of this item to your address, add it to your basket and then use the instant shipping calculator on the basket page.
Customers Also Bought
Customers Also Bought
100% SECURE
PAYMENT METHODS
GlassCast Resin is a trading name of Easy Composites Ltd, registered in England, 7486797. All content copyright (C) Easy Composites Ltd, 2022. All rights reserved.